Seagate Nytro 3331 1.92TB
(XS1920SE70014)2.5-inch SASSAS 12GbRead 1100 MB/sWrite 1000 MB/s1.92TB
HIGH
Seagate Nytro 3331 1.92TB1 listing
SSD for HP ProLiant DL380 Gen11 (DL380 Gen11)
2023–2024
Form Factor: U.2Interface: U.2 NVMeMax Capacity: 15.36TB
Upgradeable
Compatible SSDs for the HP ProLiant DL380 Gen11
Samsung PM1733 7.68TB
(MZWLJ7T6HALA-00007)U.2U.2 NVMeRead 7000 MB/sWrite 3800 MB/s7.68TBNVMeHIGHSamsung PM9A3 7.68TB
(MZQL27T6HBLA-00A07)U.2U.2 NVMeRead 6900 MB/sWrite 4100 MB/s7.68TBNVMeHIGHSamsung PM9A3 3.84TB
(MZQL23T8HCLS-00A07)U.2U.2 NVMeRead 6800 MB/sWrite 4000 MB/s3.84TBNVMeHIGHSamsung PM893 480GB
(MZ7L3480HCHQ-00A07)2.5-inch SATASATA IIIRead 550 MB/sWrite 380 MB/s480GBHIGHSamsung PM893 480GB6 listings
Seagate Nytro 3331 480GB
(XS480SE70014)2.5-inch SASSAS 12GbRead 1100 MB/sWrite 550 MB/s480GBHIGHSamsung PM1733 15.36TB
(MZWLJ15THALA-00007)U.2U.2 NVMeRead 7000 MB/sWrite 3800 MB/s15.36TBNVMeHIGHSamsung PM1733 15.36TB5 listings
Seagate Nytro 3350 1.92TB
(XS1920SE70114)2.5-inch SASSAS 12GbRead 2150 MB/sWrite 1550 MB/s1.92TBHIGHMicron 5400 PRO 3.84TB
(MTFDKBK3T8TDP)2.5-inch SATASATA IIIRead 540 MB/sWrite 520 MB/s3.84TBHIGHMicron 5400 PRO 3.84TB1 listing
SSD Upgrade Guide for the HP ProLiant DL380 Gen11
This device uses a U.2 drive with a U.2 NVMe interface. Maximum supported capacity is 15.36TB.
NVMe drives are significantly faster than SATA — if your device supports NVMe, always prefer it over a SATA SSD for the best performance.
Always power off your device and disconnect power before replacing storage.